Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Federal Heights, CO
Chimney repair in Federal Heights is mostly triage, not tuning. The housing stock here is old and dense: small post-war and 1960s-70s ranches and a large share of manufactured homes in the 80260 corridor, and many chimney systems are as old as the houses. Add Front Range freeze-thaw and heavy cold-snap burning, and the cracks show up fast. We do chimney repair, chimney sweeping, and dryer vent cleaning, so a problem found during a sweep gets fixed by the same specialist. Call (866) 361-5660 for a free estimate. Our technicians have up to 10 years of experience.
Why Federal Heights Homes Are Different
Federal Heights packs a lot of small, older homes into a tight footprint. In ZIP 80260 you’re as likely to see a modest 1960s ranch as a manufactured home, and in both cases the chimney is usually original to the build. That matters because a flue built for a simple fireplace often isn’t sized or lined for the stove insert or the heavy wood-burning that residents here use as supplemental heat.
The climate does its own damage. At roughly a mile of elevation, freeze-thaw cycles move through mortar joints and crowns every winter. Cracks open, water gets in, and the next cold snap finds a crown that’s already failing. Dry, windy springs make draft unpredictable, and residents burn harder to compensate, which builds creosote faster than a once-a-year schedule accounts for. In the older manufactured-home parks and small-lot ranches, we also commonly see short pre-fab metal chimneys with tight clearances and worn rain caps that are well past doing their job.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Federal Heights Services
Federal Heights homeowners call us about two things most often: chimney repair on aging masonry and prefab systems, and a thorough sweep before the burning season starts.
Chimney Sweep in Federal Heights
A sweep here is a safety inspection as much as a cleaning. In the older homes around Federal Heights, we’re not just brushing a flue; we’re looking at whether the liner is intact, whether the crown and brick are holding, and whether the system can handle how the fireplace is actually being used. Creosote buildup outpaces cleaning schedules in homes that burn wood hard through cold snaps, so we check the whole assembly, not just the firebox. Nothing gets recommended without evidence you can see yourself. Book a Chimney Sweep in Federal Heights before the next cold stretch.
Dryer Vent Cleaning in Federal Heights
Dryer vents are the service most homeowners forget, and in dense housing like Federal Heights’s small lots and manufactured homes, vent runs are often short but badly routed or crushed behind appliances. Lint packs into those tight runs and rarely gets cleared by anyone. It’s a leading cause of residential fires, and most chimney-only sweeps don’t touch it. We treat dryer vent cleaning as its own job: we clear the full run, check the exterior termination, and show you what came out. For a standalone visit, see Dryer Vent Cleaning in Federal Heights.
Chimney Repair in Federal Heights
Chimney repair in Federal Heights is shaped by what’s actually standing here. The housing stock is dominated by modest post-war and 1960s-70s ranches and a large share of manufactured homes in the 80260 corridor, many with masonry fireplaces that have cracked crowns, spalling brick, or unlined and minimally lined flues. Front Range freeze-thaw at roughly a mile of elevation opens mortar joints and cracks crowns every winter, and cold snaps push residents to burn harder, which accelerates the wear our Chimney Repair work is built to stop.
Chimney Cap Installation
A cap is the cheapest defense a Federal Heights chimney has against water, wildlife, and wind-driven rain.
Signs you need it
You have an open, uncapped flue, and you’re finding water stains, debris, or nesting material inside the firebox.
What it costs in Federal Heights
Chimney cap installation in Federal Heights typically runs $150 to $450 depending on cap type and flue dimensions.
How we do it
We measure the flue opening, choose a cap sized for the exact dimensions, and secure it with the correct fastening for masonry or prefab metal, checking clearance to the roofline.
Chimney Cap Replacement
Worn caps are common in the older manufactured-home parks and small-lot ranches, where short pre-fab chimneys take the full brunt of spring wind.
Signs you need it
The existing cap is rusted through, bent, loose, or missing sections, and rain or birds are getting past it.
What it costs in Federal Heights
Chimney cap replacement in Federal Heights typically costs $150 to $450, similar to new installation, since the old cap has to come off first.
How we do it
We remove the failed cap, inspect the flue top and crown while we have access, then fit and secure a replacement matched to the flue’s actual dimensions.
What Chimney Repair Costs in Federal Heights
These are typical ranges for Federal Heights, not fixed prices. The written estimate sets the final price.
| Item | Typical range in Federal Heights |
|---|---|
| Chimney cap installation or replacement | $150 – $450 |
| Chimney crown repair | $300 – $700 |
| Chimney flashing repair | $250 – $600 |
| Chimney liner installation | $1,800 – $4,500 |
| Chimney sweep | $120 – $250 |
| Dryer vent cleaning | $100 – $200 |
Does Federal Heights’s freeze-thaw cycle really damage chimney crowns?
Yes. Water soaks into small cracks, freezes, expands, and widens them. Over a few winters a hairline crack becomes a spalled crown. Crown repair here typically runs $300 to $700. Call (866) 361-5660 for an exact quote; estimates are free.
Do I really need a new liner in an older Federal Heights home?
Only if the camera shows the flue can’t safely contain what’s burning in it. Many original 1960s-70s flues are unlined or minimally lined. We show you the footage before recommending a liner. Call (866) 361-5660 for an exact quote; estimates are free.
Brands We Service in Federal Heights
For relining and resurfacing we work with DuraFlex liner systems and HeatShield resurfacing, and we fit components from Copperfield and Gelco where they’re specified for the flue. We don’t claim to stock parts locally; materials are sourced for your job. Once specified, scheduling is quick. See our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Federal Heights, CO
Every figure below is a typical range for Federal Heights. The written estimate you receive sets the final price, and there’s no fee to get one.
| Service | Typical range in Federal Heights |
|---|---|
| Chimney sweep | $120 – $250 |
| Dryer vent cleaning | $100 – $200 |
| Chimney cap installation | $150 – $450 |
| Chimney cap replacement | $150 – $450 |
| Chimney crown repair | $300 – $700 |
| Chimney flashing repair | $250 – $600 |
| Chimney liner installation | $1,800 – $4,500 |
What pushes price up in Federal Heights is usually access and condition: a short pre-fab metal chimney with tight clearances takes more careful work than an open masonry flue, and a crown that’s already spalled means repair rather than a simple seal. You get the price in writing before anything starts, so there’s no surprise on the invoice.
Neighborhoods We Serve in Federal Heights
We work throughout Federal Heights, with the heaviest concentration of calls coming from the 80260 corridor and the older small-lot ranches and manufactured-home parks nearby. Response across the city is generally quick because the footprint is compact; one scheduling note covers the whole area.
- The 80260 corridor
- Older manufactured-home parks off the main corridors
- Small-lot ranches near Federal Boulevard
- Homes bordering Thornton to the north
Service Area – Cities Near Federal Heights
Federal Heights sits close to several communities we also serve, so a call from just over the line is easy to book. We work in Shaw Heights, CO, Thornton, CO, Sherrelwood, CO, and Welby, CO, alongside Federal Heights itself. If you’re near the edge of any of these, tell us your cross streets and we’ll confirm coverage when you call.
Serving Federal Heights, CO – Our Local Coverage Area
We serve Federal Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Federal Heights
Federal Heights is compact, so scheduling is usually quick once a sweep is booked. We answer 24/7 and dispatch Sunday through Friday, 7am to 7pm. Call (866) 361-5660 to get on the schedule.
Relining and some structural repairs often require a permit, though rules vary by scope. We’ll tell you when one is needed and point you to the city’s building department so you’re not guessing. Call (866) 361-5660 with questions.
Yes. We serve all of Federal Heights, including the 80260 corridor and the manufactured-home parks and small-lot ranches within the city. If you’re unsure whether your address is covered, call (866) 361-5660 and we’ll confirm.
If your chimney needs a sweep, a repair, or a dryer vent cleared, we can help. Chimney Sweep Thornton connects Federal Heights homeowners with experienced local chimney specialists. Call (866) 361-5660 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Federal Heights Customers Say
"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Tara Schaefer"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Todd Meyer"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Doug Delaney